Variable Speed Pumps

Standard pool pumps can consume as much energy as all other home appliances combined – often costing more $1,000 per year! IntelliFlo pumps can typically cut energy use by 30% to 90% generally saving $324 to $1,356 in utility costs annually – more where rates are higher than average.

Revolutionary pool pump typically slashes energy costs 30% to 90%. IntelliFlow employs exclusive permanent magnet motors (used in hybrid cars) that provide a typical “base savings” of 30% over any pump with a traditional induction motor.

IntelliFlo includes a  variable drive, digital controls, and proprietary software that allow custom programming of the optimum speed per function – filtering, heating, cleaning, operating water features – for even greater saving…up to 90%. For most all applications, the optimum speed is significantly lower than possible with traditional pump technology, so you can exploit a fundamental pump law: by going slower; power consumption is reduced. In fact, when pump speeds are reduced by half, energy use is just one-eighth of what was previously used.

The quietest running pump on the planet
Thanks again to its permanent magnet motor and totally enclosed fan cooled (TEFC) design, IntelliFlo is also the quietest pump ever built. At typical speeds you barely notice it.

Longer, trouble-free service life – greater return on investment

IntelliFlo Pump’s permanent magnet motors produces far less heat and vibration than traditional induction motors. This results in less stress and wear on pump components and other equipment too.

Built-in diagnostics protect IntelliFlo from the most common causes of premature pump failure – overheating, freezing, and voltage irregularities.

High Performance Heaters

MasterTemp high performance heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.

Best-in-class energy efficiency
High efficiency rating makes these heaters extremely economical to operate. If your pool heater is more than 5 years old, chances are a MasterTemp could quickly pay for itself in utility bill savings. • Optimized fuel/air mix provides superior efficiency and faster heat up.

Certified for low NOx emissions. In fact, our heaters outperform current industry standards for air pollution exhaust.

Super-quiet operation won’t intrude on pool leisure time.

Built to last longer
Tough composite exterior won’t corrode; stands up to both heat and weather.

Heat Pumps

When a heat pump is appropriate for your climate, it is the most energy-efficient heating option. ThermalFlo heat pumps transfer heat from the atmosphere to the pool or spa, saving up to 80% in energy costs compared to gas-fired heaters. Plus, they are the only heat pumps available that use R-410A refrigerant – EPA – recognized as environmentally safe and clean.

Save up to 80%in energy costs
Heat pumps are the most energy-efficient heating option.
ThermalFlo uses the most energy-efficient compressor available.
State-of-the-art fan design improves air follow by 40% to enable high efficiency.
Check with your pool professional to see if a heat pump is appropriate for your region.

Uses environmentally safe and clean refrigerant
The only heat pump using EPA-recognized R-410A refrigerant, a safe, clean, and non-ozone depleting refrigerant.

Built to provide long-lasting value
Tough composite exterior won’t corrode; stands up to both heat and weather.

Compare the Cost
This chart illustrates how a ThermalFlo Heat Pump generates 2 to 4.6 times more heat for the same cost. Costs are based on national average fuel costs and efficiencies. Please consult your local provider for current pricing.

Fuel Type	Cost	BTU/$.01
Electric	$.1065/kWh	320
LP Gase	$1.87/Gal	401
Oil	$2.22/Gal	472
Natural Gas	$1.218/Therm	673
ThermalFlo	$.1065/kWh	1408
National average as published in the Federal Register, March 21, 2007

D.E. (Diatomaceous Earth) Filters

Water flows very efficiently through Quad D.E. filters, allowing the use of smaller pumps or lower pump speeds to minimize energy use. And when you rinse cartridges rather than backwash, you can significantly reduce water use too.

More efficient water flow through Quad D.E. filters may allow use of smaller pumps of lower pump speeds to minimize energy use.

Unique internal flow path ensures optimum filtration while reducing overall back-pressure.Can be installed without backwash valve, further increasing hydraulic efficiency.

Cartridge cleaning options can significantly reduce water usage.
When you can rinse the cartridge rather than backwash, water is reduced by hundreds, if not thousands of gallons per year.Large-capacity cartridges provide maximum filter surface area for greater dirt-trapping capacity and fewer cleanings.

Durable construction provides longer service life
Chemical-resistant, fiberglass-reinforced polypropylene tank provides exceptional strength.

Cartridge Filters

Water flows very efficiently through the Clean & Clear Plus filters, often allowing the use of smaller pumps or lower pump speeds to minimize energy use. And when you rinse cartridges rather than backwash, you can significantly reduce water use too.

More efficient water flow through Clean & Clear Plus cartridge filters may allow the use of smaller pumps or lower pump speeds to minimize energy use
Unique internal flow path ensures optimum filtration while reducing overall back-pressure.

Rinsing cartridges uses less water compared to backwashing
When you rinse the cartridges rather than backwash, water use is reduced by hundreds, if not thousands of gallons per year.

Durable construction provides longer service life
Chemical-resistant, fiberglass-reinforced polypropylene tank provides exceptional strength.

Pressure-Side Automatic Pool Cleaner

The powerful Legend II pressure-side automatic pool cleaner does not require a booster pump, providing highly energy-efficient cleaning performance.

Legend II cleaner provides great value in a powerful pressure-sided cleaner.
No need to buy or operate a separate booster pump --- saving money and energy.
Front-wheel drive provides maximum traction on inclined surfaces for better, faster coverage of pool bottom and walls.
4-wheel design and even wider base prevent tipping (common with 3-wheel cleaners) for uninterrupted performance.
Dual thrust jets for maximum power and optimum travel speed—adjustable to assure complete overage in pools with different slopes and shapes.
Cleans most pools completely in just 1-3 hours.
60% larger debris bag captures more dirt, wider gab opening makes emptying a cinch, and new snap-lock bag provides easy, secure closure.

Automated Color-Changing Lights

IntelliBrite LED (Light Emitting Diode) color changing pool and spa lights are the most energy-efficient pool and spa lighting option available. Plus, they can last 30,000 hours or more, minimizing replacement cost and disposal.

LED lights use the least amount of energy of all lighting options

IntelliBrite pool lights need only 37 watts to create the same light output as traditional incandescent and halogen pool lights do at 161 watts—more than 75% less! And IntelliBrite spa lights use only 23 watts for the same light output compared to 47 watts for traditional lights. That’s because incandescent and halogen bulbs use only a small amount of their electricity consumptions for emitting light. LED lights, by contrast, use 100% of energy to produce light.

LED lights are more durable and can last longer

The life of an IntelliBrite LED is approximately 30,000+ hours compared to only 5,000 hours for traditional incandescent light bulbs.

Cool running LED lights are durable, solid state technology with no internal filament to wear out.

Unlike many LED pool lights, the IntelliBrite lights continue to work even when a single LED fails.

Automation

Pentair control systems can optimize energy use and equipment performance by automating and synchronizing equipment scheduling. They prevent problems and waste so you don’t have to rely on your memory or limited time clocks to operate or turn off equipment.

Automated control systems can help offset rising utility costs.

Equipment schedules are easily altered to account for changes in pool usage, weather and other factors that impact overall equipment performance.

Equipment isn’t accidentally left on for extended periods, thereby wasting energy (for example: lights, cleaner, heaters).

Control systems make is easier to take advantage of off-peak, seasonal utility rates.

Automatic Chlorine Generator

Using only natural table salt, the IntelliChlor automatic chlorine generator creates pure chlorine in your pool and eliminates the need to buy, store and add harsh chlorine products manually, In effect, fewer resources are used in the production, packaging and transportation of the chemical compounds.

Production and transportation energy and waste are reduced
Less chlorine needs to be produced at chemical processing plants for use in swimming pools and spas. This reduces emissions and energy use from production, packaging and transportation.

Provides effective sanitization performance without the drawbacks of expensive chlorine compounds
You no longer need to buy, transport, store or handle chlorine products. This reduces the chance of spills or accidental exposure and eliminates cost.
Because the chlorine is pure, the odor, stinging eyes, and irritated skin caused by additives in packaged chlorine.

Engineered to stand up to the toughest pool conditions an provide years of dependable service
Rated for more than 10,000 hours of operation – five years of reliable chlorine output under normal operating conditions
Control electronics are isolated in the cell for longer cell life.
Waterproof electronics for maximum reliability.